Відео

Thank you for simplifying the options! As a solo kayaker with an almost 80 pound kayak I was able to figure out which will work best for me and my vehicle. Thank you!

I purchased the recommended 1/8” paracord from Harber Frieght. If you carefully heat the outer jacket so it shrinks and becomes more rigid you can easily thread it through the hole and pulley. Otherwise the outer sheath slides and bunches if you tried to push it. The same thing for the T handle. Don’t over heat because the jacket will melt.

Hi thank you for this video. Can you show how thé humminbird adapter kit is fixed?

Excellent video!

All you have to do is make a video showing how you use toilet paper

Well done!

Hobies are proven faster if the sailer has the Aussie accent😊

So how much extra speed does a spinnaker provide at various winds such as a 10 knot wind ?

Bloody brilliant cobber!

Great bit of gear.

Buongiorno quanto questo accessorio?

Anyone know the part number or link for the large drain plug?

Id prob use a strap mainly if there was a strong wind whils loading or unloading it could easy push the kayak off it..i mean when your under it wheeling the winch you cant hold it

Unbelievable quality! So happy we bought this!

My first time Kayaking and this Kayak held strong. ua-cam.com/users/postUgkx4k5UrhC3v_Y4hIEaXLGvHcN5a5aBmZNB The water got pretty rough as a speed boat zipped by me, and the Kayak withstood it (I expected to be capsized). The Ores are very easy to put together, the pump worked beautifully. the seats are a bit hard to sit in after a while (I recommend sitting on the floor). after reading the reviews I was very scared it'd get a hole in it, the material is very strong and durable. The Air valve may need a small Phillips head screwdriver to adjust, other than that, it's well worth the money!(update)I've gone Kayaking in 3 Lakes and 2 rivers totaling about 40 miles. the kayak had two holes and they patched easily and no other problems can't wait for kayaking season this year!

Hi, i need sth like . How can i get it in Canada? Please advise

Nice video. Thank you. How much would this service cost?

The circle of life. Heavier kayaks mean newer and more expensive loading systems. New/expensive loading systems only encourages them to build heavier kayaks. More weight, more money, more solutions, more weight, more money, etc., etc. There's a hole in the bucket Dear Liza, Dear Liza.

Would this work on a Jeep Rubicon with a 37" spare tire on the back ? How far is the 90 degree up from hitch?

Great tip with the extra bit of dowel. That must safe some headache , looked super smooth installing and keeping those rod bearings in the right place.

Awesome setup! how did you connect the rod holders to the front? wanting to do something similar to mine. Thanks

Nice video but the music is spooky.

Intro sucks.

Maior sonho da minha vida eu queria

Does it pull apart to shove in your car?

Muy bueno ! ❤ I will try the angled rod holder in my hobie outback. Already holds 4 rods but I like the “outrigger placement”

Are they sold in the USA?

Great Now try loading your 18' sea kayak into a 20 mph late afternoon onshore breeze and with your bottom is covered in coarse coral sand I think that the best solution is a version of what roll-off containers use The separate rack is mounted to your existing roof rack,it slides down to the ground,load and secure your kayak and then winch the rack back to the roof

I have this same Outback. Could you recommend a high back upgraded seat? the standard seat does not give me enough back support while I am peddling. I also have the Revo with the improved seat and love it but that seat does not fit the older Outback seat well. Thanks and Subed

Update from SLH November 2022. Our loaders have been super successful and are beating what was once an impossible kayak loading problem for a lot of people. No other loading device handles a heavy kayak, especially a Pro Angler as easy. We know our workshop has struggled to keep up with demand but we hope to smooth that out soon. Thank you to those of you that now own our SLH Kayak loader for your support. On a side note : Adding a strap around the middle of the kayak when perched on the loader for assurance is a good idea. Especially if parked on broken ground. For me, so far, I haven't felt a need to use a strap as the kayak stays put and its easy to monitor it as you load. Also, as far as accidents go there have been no "Zombie Kills Of The Week" so far. Cheers, Scott

Can I get this in US? Pls confirm. If yes how?

Many thanks for this!

Very nicely made: Thanks for the video. Do you know where you purchased the fighting style skipper seat?

Don't worry. Be happy. Thanks for the laugh Scott. And the clarification before I started to panic.

Have the receiver hitch model. Loading kayaks over 50 lbs I have been too vigorous and the kayak has gone too far. They are poly and were not damaged. Considering trying an 85 lb Hobie. Have loaded a 140 lb Laser a number of times, but that is hard to do after a long day. I am 5/7" on a good day.and was 70 at the time.

We need to be able to get that here in the USA.

@0:55 "Every single hobbie hull" Not entirely true. The Passports for example are two piece thermoformed, not rotomolded.

excellent video, thanks guys!

Loved the far away angle to see what he was doing! SUPER helpful…

These crafts are loved and used worldwide but need upgrade & care - Big smile😀 by watching the Aussie way' of improvements Many thanks & greetings from up north 🇧🇻🌐🇳🇿

That was a waste of time.

Cool idea. But I think Id at least want to use a strap to hold the kayak because it sure seems like a could slip off of that and fall pretty easily.

An accident waiting to happen!

great idea!

Excuse me, where can I get something like that? I already looked at the store, but they don't ship to the United States, thanks.

Nice and I’m thinking about ordering one but every time I look they are out of stock 😞

U have a link on how u setup your anchor?

HI Scott and Richard, one question on this install, I own 2019 PA 12 Ft and I keep reading that the transducer still sits to low using the adaptor kit and that it will not give correct readings. I guess I'm curious to better understand from you guys your point of view since you have this installed. Have you seen any mis-read within the Side imaging or anything wonky.

I don't fish and still have half a dozen mods I will do from this vid!

Can these covers be used for trailering at 75 MPH?